HIKVISION DS-2TD6267-75C4L/W User Manual page 86

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
Set SSH
SSH is a protocol to ensure security of remote login. This setting is reserved for professional maintenance
personnel only.
Steps
1. Go to Configuration → System → Security → Security Service.
2. Check Enable SSH.
3. Click Save.
Set HTTPS
HTTPS is a network protocol that enables encrypted transmission and identity authentication, which
improves the security of remote access.
Steps
1. Go to Configuration → Network → Advanced Settings → HTTPS.
2. Check Enable.
3. Click Delete to recreate and install certificate.
•
Create and install self-signed certificate. Refer to
•
Create certificate request and install certificate
4. Click Save.
Create and Install Self-Signed Certificate
Refer to Install Authorized Certificate
Steps
1. Check Create Self-signed Certificate.
2. Click Create.
3. Follow the prompt to enter Country, Hostname/IP, Validity and other parameters.
4. Click OK.
Result
The device will install the self-signed certificate by default.
Install Authorized Certificate
If the demand for external access security is high, you can create and install authorized certificate via
HTTPS protocol to ensure the data transmission security.
UM DS-2TD6267-75C4L/W 042221NA
Create and Install Self-signed Certificate
.
86