HIKVISION DS-2TD6267-75C4L/W User Manual page 61

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
Defog
You can enable the defog function when the environment is foggy and the image is misty. It enhances the
subtle details so that the image appears clearer.
Set Laser Parameters
Steps
1. Go to Configuration → System → Maintenance → System Service.
2. Enable Laser Optical Axis Adjustment.
3. Adjust the optical zoom ratio to the maximum value via the PTZ control panel.
4. Click the direction buttons to adjust the laser position.
5. Adjust the sensitivity. The higher the value, the faster the cursor moves.
6. Click Save when the laser point is in the center of live view.
7. Go to Configuration → Image → Display Settings → Image Enhancement to set the laser compensation
region.
8. Adjust the laser compensation level.
Set Palette
You can select the palette mode to display the thermal grayscale image in color.
Steps
1. Go to Configuration → Image → Display Settings.
2. Select the thermal channel.
3. Select a palette mode in Image Enhancement according to your need.
Result
The live view displays the image using a color palette.
Set Target Color
You can set the color of the targets in different temperature ranges to identify the target quickly.
Steps
1. Go to Configuration → Image → Display Settings.
2. Select the thermal channel.
3. Click Image Enhancement, select Palette as White Hot or Black Hot.
UM DS-2TD6267-75C4L/W 042221NA 61