Port Mapping - HIKVISION DS-2TD6267-75C4L/W User Manual

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
Go to Configuration → Network → Basic Settings → Port for port settings.
• HTTP Port: The port through which the browser accesses the device. For example, when the HTTP Port
is modified to 81, you need to enter http://192.168.1.64:81 in the browser for login.
• HTTPS Port: The port through which the browser accesses the device with a certificate. Certificate
verification is required to ensure the secure access.
• RTSP Port: The real-time streaming protocol port.
• SRTP Port: The secure real-time transport protocol port.
• Server Port: The port through which the client adds the device.
• Enhanced SDK Service Port: The port through which the client adds the device. Certificate verification
is required to ensure secure access.
• WebSocket Port: TCP-based full-duplex communication protocol port for plug-in free preview.
• WebSockets Port: TCP-based full-duplex communication protocol port for plug-in free preview.
Certificate verification is required to ensure the secure access.
NOTE:
Enhanced SDK Service Port, WebSocket Port, and WebSockets Port are supported only by
certain models.
For device models that support the function, go to Configuration → Network → Advanced
Settings → Network Service to enable it.

12.3. Port Mapping

By setting port mapping, you can access devices through the specified port.
Before You Start
When the device ports are the same as those of other devices in the network, refer to Port to modify the
device ports.
Steps
1. Go to Configuration → Network → Basic Settings → NAT.
2. Select the port mapping mode.
•
Auto Port Mapping: Refer to
•
Manual Port Mapping: Refer to
3. Click Save.
UM DS-2TD6267-75C4L/W 042221NA
Set Auto Port Mapping
Set Manual Port Mapping
for detailed information.
for detailed information.
73