Automatic Thermography - HIKVISION DS-2TD6267-75C4L/W User Manual

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
NOTE:
Refer to the
3.2.

Automatic Thermography

Configure the temperature measurement parameters and temperature measurement rules. The device can
measure the actual temperature and output alarms when temperature exceeds the alarm threshold value.
Set Thermography Parameters
Configure the parameters of temperature measurement.
Before You Start
Go to Configuration → System → Maintenance → VCA Resource Type, select Temperature
Measurement+Behavior Analysis.
Steps
1. Go to Configuration → Local, enable Display Temperature Info.
•
Display Temperature Info.: Select Yes to display temperature information on live view.
UM DS-2TD6267-75C4L/W 042221NA
Figure 1, Thermography Configuration Flow Chart
Quick Start Guide
for detail information of Installation part in the flow chart.
15