Set Transmission Parameters - HIKVISION DS-2TD6267-75C4L/W User Manual

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
Conduct 3D Positioning
3D positioning relocates the selected area to the image center.
Steps
1. Click to enable the function.
2. Select a target area in live image.
•
Left click on a point on live image: the point is relocated to the center of the live image. With no
zooming in or out effect.
•
Hold and drag the mouse to a lower right position to frame an area on the live: the framed area is
zoomed in and relocated to the center of the live image.
•
Hold and drag the mouse to a n upper left position to frame an area on the live: the framed area is
zoomed out and relocated to the center of the live image.
3. Click the button again to turn off the function.
De-icing
Click to de-ice the device manually.
Synchronize FOV
Click to synchronize the optical lens and the thermal lens FOV.
9.2.

Set Transmission Parameters

The live view image may be displayed abnormally according to the network conditions. In different network
environments, adjust the transmission parameters to solve the problem.
Steps
1. Go to Configuration → Local.
2. Set the transmission parameters as required.
• Protocol TCP: Ensures complete delivery of streaming data and better video quality, yet the real-
time transmission will be affected. It is suitable for a stable network environment.
• UDP: Suitable for unstable network environments that do not demand high video fluency.
•
MULTICAST: Suitable for situations where there are multiple clients. Set the multicast address for
them before selection.
•
HTTP: Suitable for situations where a third-party needs to get the device stream.
•
Play Performance
UM DS-2TD6267-75C4L/W 042221NA 52