Chapter 7 Arming Schedule And Alarm Linkage; Set Arming Schedule; Linkage Method Settings - HIKVISION DS-2TD6267-75C4L/W User Manual

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual

Chapter 7 Arming Schedule and Alarm Linkage

Arming schedule is a customized time period during which the device performs certain tasks. Alarm
linkage is the response to certain detected incidents or targets during the scheduled times.
7.1.

Set Arming Schedule

Set the valid time of the device tasks.
Steps
1. Click Arming Schedule.
2. Drag the time bar to draw the desired valid time.
NOTE:
Up to eight periods can be configured for one day.
3. Adjust the time period.
• Click on the selected time period, and enter the desired value. Click Save.
•
Click on the selected time period. Drag both ends to adjust the time period.
•
Click on the selected time period, and drag it on the time bar.
4. Optional: Click Copy to... to copy the same settings to other days.
5. Click Save.
7.2.

Linkage Method Settings

You can enable linkage functions when an event or alarm occurs.
Trigger Alarm Output
If the device has been connected to an alarm output device, and the alarm output no. has been
configured, the device sends alarm information to the connected alarm output device when an alarm is
triggered.
Steps
1. Go to Configuration → Event → Basic Event → Alarm Output.
2. Set alarm output parameters.
•
Automatic Alarm: For configuration information, see
•
Manual Alarm: For configuration information, see
3. Click Save.
UM DS-2TD6267-75C4L/W 042221NA
Automatic Alarm
.
Manual Alarm
.
36