Chapter 2 Device Activation And Accessing; Activate The Device Via Sadp; Activate The Device Via Browser - HIKVISION DS-2TD6267-75C4L/W User Manual

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual

Chapter 2 Device Activation and Accessing

To protect the security and privacy of the user account and data, set a login password to activate the
device when accessing the device via a network.
NOTE:
See software client user manual for detailed information about client software activation.
2.1.

Activate the Device via SADP

Search and activate the online devices via SADP software.
Before You Start
Access www.hikvision.com to get the SADP software to install.
Steps
1. Connect the device to a network using a network cable.
2. Run SADP software to search for online devices.
3. Check Device Status from the device list, and select Inactive device.
4. Create and input the new password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong
password of your own choosing (using a minimum of eight characters, including at least
three of the following categories: upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product. We also recommend
that you reset your password regularly. Especially in high security systems, resetting the
password monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
5. Click OK. Device Status changes to Active.
6. Optional: Change the network parameters of the device in Modify Network Parameters.
2.2.

Activate the Device via Browser

You can access and activate the device via a Web browser.
Steps
1. Connect the device to a PC using the network cables.
2. Change the IP address of the PC and device to the same segment.
NOTE: The default IP address of the device is 192.168.1.64. You can set the IP address of the PC
from 192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP
address of the PC to 192.168.1.100.
UM DS-2TD6267-75C4L/W 042221NA 12