HIKVISION DS-2TD6267-75C4L/W User Manual page 85

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
Security Audit Log
The security audit logs refer to the security operation logs. You can search and analyze the security log
files of the device so as to find out the illegal intrusion and troubleshoot the security events.
Security audit logs can be saved on device internal storage. The log will be saved every half hour after
device booting. Due to limited storage space, you can also save the logs on a log server.
Search Security Audit Logs
You can search and analyze the security log files of the device so as to find out the illegal intrusion and
troubleshoot the security events.
Steps
NOTE:
This function is supported only by certain camera models.
1. Go to Configuration → System → Maintenance → Security Audit Log.
2. Select log types, Start Time, and End Time.
3. Click Search.
The log files that match the search conditions will be displayed on the Log List.
4. Optional: Click Export to save the log files to your computer.
Set IP Address Filter
IP address filter can allow or forbid visits from certain IP addresses.
IP address refers to IPv4.
Steps
1. Go to Configuration → System → Security → IP Address Filter.
2. Check Enable IP Address Filter.
3. Select the type of IP address filter.
•
Forbidden: IP addresses in the list cannot access the device.
•
Allowed: Only IP addresses in the list can access the device.
4. Edit the IP address filter list.
• Add: Add a new IP address to the list.
•
Modify: Modify the selected IP address in the list.
•
Delete: Delete the selected IP address in the list.
5. Click Save.
UM DS-2TD6267-75C4L/W 042221NA 85