Configure Intelligent Analysis In Panorama View - HIKVISION DS-2TD4668-35A4/W User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Select to display target info and rule on stream, the information will be added to the video
stream, and the overlay will be displayed if you get live view or play back by the VS Player.
Display Target Info. on Alarm Picture
Select to display the target information on the alarm picture.
Display Rule Info. on Alarm Picture
Select to display the rule information on the alarm picture.
Snapshot Settings
Select to upload the picture to the surveillance center when the VCA alarm occurs. You can
also set the quality of the picture.
3. Click Save.

5.3 Configure Intelligent Analysis in Panorama View

The intelligent analysis of panorama view is used to detect targets and send alarms when the
device is in motion.
Before You Start
Switch the scene mode to Panorama View. Please refer to Switch the Scene Mode .
Steps
1. Go to Configuration → VCA → Basic Settings , and check Intelligent Analysis to enable the
function.
2. Refer to Set VCA Parameters to configure VCA parameters.
3. Go to Configuration → VCA → Panorama Rule , Click
1) Enter the Rule Name, and click the drop down menu to select Rule Type.
Note
You can only set one rule in Panorama View mode.
2) Click to draw an area in the live view. Right click the mouse to finish drawing.
Duration: The device performs perimeter protection when the target stays in the detection
area for more than set value.
3) Set parameters of the rule.
4) Check to enable Filter by Pixel. Then draw max size and min size rectangles to filter the target
among human, vehicle, animal, and others. Only the target whose size is between the Max.
Size and Min. Size value will trigger the alarm.
to add a new rule..
20