DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
6. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting
linkage method.
7. Click Save.
6.3.
Set Alarm Input
Alarm signal from an external device triggers the corresponding actions of the current device.
Before You Start
Make sure the external alarm device is connected. See
Steps
1. Go to Configuration → Event → Basic Event → Alarm Input.
2. Check Enable Alarm Input Handing.
3. Select Alarm Input NO. and Alarm Type from the drop-down list. Edit the Alarm Name.
4. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting
linkage method.
5. Click Copy to... to copy the settings to other alarm input channels.
6. Click Save.
UM DS-2TD6267-75C4L/W 042221NA
Figure 7, Set Video Tampering Area
Quick Start Guide
for cable connections.
33