Set Pattern Scan - HIKVISION DS-2TD6267-75C4L/W User Manual

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
6. Operate patrols.
•
Call the patrol
:
•
: Stop patroling
•
: Delete the patrol
•
Set the patrol
:
You can delete all patrols in Configuration → PTZ → Clear Config. Click Clear All Patrols, and
NOTE:
click Save.
Set One-Touch Patrol
The device automatically adds presets to one patrol path and starts patrol scan.
Steps
1. Set two or more presets among preset No.1 to preset No.32. For setting presets, refer to
NOTE:
The device will automatically add presets to patrol path No. 8.
2. Choose one of the following methods to enable the function.
•
Click .
•
Call patrol path No. 8.
•
Select and call preset No. 45.
8.4.

Set Pattern Scan

The device can move as the recorded pattern.
Steps
1. Click to show the PTZ control panel, and click
2. Select one pattern scan path that needs to be set.
3. Click to start recording pattern scan.
4. Click PTZ control buttons as desired.
NOTE: Recording stops when the space for pattern scan is 0%.
•
Click to complete one pattern scan path settings
•
Click to call pattern scan
•
Click to stop pattern scan
UM DS-2TD6267-75C4L/W 042221NA
.
Set Preset
.
43