Setting The Cooling Condition; Actuate Blown Air; Preselect Counterclockwise Motor Rotation - KaVo ESTETICA E70 Vision Instructions For Use Manual

Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.12 Using the foot control

4.12.8 Setting the cooling condition

▶ Remove the handpiece (such as turbine, motor) from the holder
ð
The handpiece is active.
▶ Press "Preselected spray" footswitch.
ð
The cooling level is raised each time the footswitch is pressed: no cooling -
air - spray.
ð
The cooling level is displayed on the dentist's and assistant's element.

4.12.9 Actuate blown air

▶ Remove the handpiece (such as turbine, motor) from the holder
ð
The handpiece is active.
▶ Press the "Blown air" foot button.
ð
As long as the footswitch is pressed, blown air exits the removed handpiece
(not with the PiezoLED)

4.12.10 Preselect counterclockwise motor rotation

▶ Take motor off the holder.
ð
The handpiece is active.
▶ Slide the cross switch upward.
ð
The direction of motor rotation is toggled each time the cross-switch is
pushed: counterclockwise rotation - clockwise rotation.
ð
The direction of motor rotation is displayed by the active symbol on the
dentist element.
4.12.11 Adjusting the instrument light
▶ Slide the cross switch to the right. (spotlight function)
ð
Cold light "On" (even when Cold light: "Off" is preselected).
▶ Slide the cross switch to the left.
ð
Change the cold light status: "On/Off"
104 / 178