Setting The Cooling Condition; Activate Blown Air; Preselect Counterclockwise Motor Rotation; Adjusting The Instrument Light - KaVo Primus 1058 Life TM Instructions For Use Manual

4.9.5 Setting the cooling condition

▶ Remove the handpiece (e.g turbine, motor) from the holder.
ð
The handpiece is active.
▶ Press the "Preselected spray" footswitch.
ð
The cooling status is switched each time the foot switch is pressed: spray air
- spray.
ð
The cooling status is displayed on the dentist element.

4.9.6 Activate blown air

▶ Remove the handpiece (such as turbine, motor) from the holder.
ð
The handpiece is active.
▶ Press the "Blown air" foot-operated button.
ð
As long as the foot-operated button is pressed, blown air exits from the re-
moved handpiece (does not apply to PiezoLED).

4.9.7 Preselect counterclockwise motor rotation

▶ Take motor off the holder.
ð
The handpiece is active.
▶ Slide the cross switch upward.
ð
The direction of motor rotation is reversed each time the cross-switch is ac-
tuated: counterclockwise rotation - clockwise rotation.
ð
The direction of motor rotation is displayed on the dentist element.

4.9.8 Adjusting the instrument light

▶ Slide the cross switch to the right. (spotlight function)
ð
Cold light "On".
4 Operation | 4.9 Operating the foot switch
83 / 126
Instructions for use Primus 1058 Life