Alarms - Polycom SpectraLink 6300 MCU Manual

Alarms

PN: 1725-36125-001_L.doc
The SpectraLink 6000 System software constantly monitors system
components for problems. If a problem is detected, the system will
flag the problem with an alarm. Alarms are displayed in two places:
• LEDs The front panels of all system cards (System Controller card,
Shelf Controller, and Interface Modules) have six LEDs: one red
(labeled ), and five green (labeled
ALARM
status, including alarm conditions. LED sequences, descriptions,
and recommended procedures are provided in SpectraLink 6300
MCU: Maintenance and Diagnostics, section on Troubleshooting Card
Alarms.
• Operator's Console The Chk3000 program allows the
administrator or technician to display details about each system
component. If the component is in an alarm state, details about the
alarm will display on the appropriate screen.
See SpectraLink 6300 MCU: Maintenance and Diagnostics for more
information about troubleshooting alarms.
6
through ) to indicate
1 5
59