Port Location - Polycom SpectraLink 6300 MCU Manual

Port Location

PN: 1725-36125-001_L.doc
The Operator's Console, enabled through the chk3000 software
program, provides information about the SpectraLink 6000 System
components. The system is designed in a star topology. At the center
is the System Controller card, which manages the call processing for
the wireless network. Shelf Controllers work with the System
Controller card to pass calls within the wireless network and to the
telephone system. All shelves provide universal slots for up to ten
Interface Modules. Interface Modules connect Base Stations and
handsets to the system. Up to 20 shelves can be connected together for
maximum system capacity.
Chk3000 identifies each system component by a unique Port Location,
based on the following address scheme:
Shelf (1- 20)
For example:
• Wireless Telephone in Shelf 2, slot 3, line port 10 – Port Location is
2.03.10
• Wireless Telephone in Shelf 1, slot 5, line port 1 – Port Location is
1.05.01
• Base Station associated with Shelf 3, slot 3, Base Station Port 2 -
Port Location is 3.03.02
• The Interface Module in Shelf 2, Slot 3 is identified as 2.03.
Slot (3- 12)
Install the Console
Line port 1-16
Base Station port 1-6
11