Polycom SpectraLink 6300 MCU Manual page 26

SpectraLink 6300 MCU: Operator's Console: SpectraLink 6000 System
26
Macros
(F6-MCU Macros Display). For example, if you define
the "Analog" custom menu as Xfer, you must also define
the Macros menu as Xfer.
• For digital interfaces, the features defined for the custom menus
should match the programming assigned through the telephone
system. For example, if you define
function menu as Xfer, you must assign Xfer to the key that
corresponds to
FCN 2
emulated by the handset. See the LinkPlus Interface Guide for
information on key assignments for your type of telephone
system.
Note that some key assignments cannot be customized on certain
types of telephone systems.
Follow this procedure to customize the handset (PT) menus for
Analog Systems:
1. Select to enter the
F9
2. Select the menu number (
menu, enter the information for that menu.
his custom menu will apply to all handsets on any
PBX type: T
Interface Module associated with this host telephone system (PBX)
type. Press the right arrow key to display a menu of choices. Use
the arrow keys to highlight the host telephone system (PBX) type,
and press Enter to select it.
Press the right arrow key to display a menu of
Menu Source
choices. Use the arrow keys to highlight the setting, and press
on the "Meridian"
FCN 2
on the Meridian digital telephone which is
PT Menu Administration
through ) to be edited. At the pop-up
1 8
on
FCN 2
on
FCN 2
function.
PN: 1725-36125-001_L.doc