Polycom SpectraLink 6300 MCU Manual page 30

SpectraLink 6300 MCU: Operator's Console: SpectraLink 6000 System
30
System Alarm recording
If the COM port is set to Alarm, the SpectraLink 6000 System will
output a record of each system alarm as it occurs. You may want to
record this data to troubleshoot a problem or if a record of alarms is
required for any reason.
Alarm data may be captured using the same mechanisms used for
Call Detail Recording, described above. For more information on how
to capture and save SpectraLink 6000 System Alarm data, contact
Polycom or your distributor.
PN: 1725-36125-001_L.doc