Polycom SpectraLink 6300 MCU Manual page 38

SpectraLink 6300 MCU: Operator's Console: SpectraLink 6000 System
38
Shelf detail – Expansion Shelf
The following screen shows the details for the Expansion Shelf.
In normal function, state is
Cabinet State
Lists alarm name if shelf is in alarm state.
Cabinet Alarm
The last time shelf went into alarm state.
Alarm Time
If there is an alarm (
Collision
between Shelf Controller and the Intershelf Junction Panel (e.g. A and
B connectors are not correctly connected to the A and B ports on the
shelf card.)
The highest level reached in the shelf's queue, and the
IPC Hi/Ov
number of times the queue has overflowed. The overflow should be
Used by Polycom engineering.
through
Card Status (01
on that card.
Amount of time the Shelf Controller card has been running.
CC Uptime
Shelf Controller card state. In normal function, state is
CC State
.
Running
Shows which highways on this shelf are disabled or not
CC Hwy Dis
yet in use. Shows 10 dots (one for each card between slots 3 and 12). If
a dot ( )displays, the highway is ok or has been used. If a
.
the highway is disabled or not used yet. A
card plugged into a slot.
Running
), indicates a problem with cabling
!
An exclamation point (
12)
d
.
) indicates an alarm
!
displays,
d
displays if there is no
PN: 1725-36125-001_L.doc
.
0