Polycom SpectraLink 6300 MCU Manual page 16

SpectraLink 6300 MCU: Operator's Console: SpectraLink 6000 System
16
To select a specific shelf (cabinet) or port using the search menu:
1. With the port location field highlighted, press Enter to display the
menu.
2. Scroll down to
Select Cabinet (shelf) /Portcard (Interface Module)
press Enter. This displays a menu of options. Scroll down to the
desired option and press Enter to select it.
isplays all shelves (cabinets) and slots in the
Select Cabinet D
system. Use the arrow keys to scroll through the list. Highlight the
shelf or slot you want to see and press Enter.
Find First Line Note
as the user's name) for all lines for a specific sub-string (e.g.,
Jones.). Notes are case sensitive.
Find First Line Extension/SPID A
numbers or SPIDs for a extension or SPID (e.g., 333).
Find First Line PT Serial Number A
serial numbers for a specific nine-digit serial number. The number
must be nine digits and entered exactly.
Find First RCU Note
(usually entered as the location) for a specific sub-string (e.g. West
Wing). Notes are case sensitive.
Allows you to repeat the search again. Alt-F also
Find Next
performs this function.
3. Use the arrow keys to highlight the desired menu option, then
press Enter.
4. Enter the search criteria, then press Enter.
Define Interface Module (Portcard) type
Each Interface Module in the system must be assigned a type which
defines the type of host telephone system with which the card will
interface.
1. From the
Portcard Configuration Display and Administration
use the arrow keys or mouse to position the cursor on the PBX
field (if this is a new card it will say
2. When the submenu displays, use the arrow keys or mouse to
select the Portcard type from the menu of switch interfaces, and
press Enter. The selected Portcard type will display. The screen
below shows type
Allows you to search the Notes (usually entered
llows you to search all extension
llows you to search all handset
Allows you to search all Base Station notes
Unconfigured
.
Analog
and
screen (F4),
) and press Enter.
PN: 1725-36125-001_L.doc