Polycom SpectraLink 6300 MCU Manual page 46

SpectraLink 6300 MCU: Operator's Console: SpectraLink 6000 System
46
Number of resyncs for this line.
Resyncs
Number of times the line accessed a full Base Station.
RCU Full
Number of calls received.
Calls In
Number of calls made.
Calls Out
Amount of time the handset was off-hook (or active).
Calls Dur
Base Station (RCU) menu
Highlight any Base Station (RCU) on the Interface Module and press
Enter to display a menu of display options for Base Stations.
Displays detailed information about a specific line.
Show RCU Detail
See next section.
Show RCU Listen Report
diagnostic test for the selected Base Station. See Chapter 4 Diagnostics,
section Listen Verify Test.
Clears any alarms associated with a specific Base
Clear RCU Alarm
Station (RCU).
Clear MCU/CT/DAA Alarms
cleared.
Resets the Base Station (RCU) selected.
Reset RCU
Resets the Interface Module (port card).
Reset Portcard
Access to diagnostic information. Used by Polycom
Advanced Functions
engineering.
Select Cabinet/Portcard
line or Base Station. See Chapter 2 System Configuration, section
Configure Interface Modules (Port Cards)
(F4-Portcard Configuration Display
and Administration).
Show Base Station (RCU) detail
This option shows the detail for a specific Base Station.
Displays results of the last Listen Verify
Displays a menu of possible alarms to be
Allows you to search for a particular cabinet,
PN: 1725-36125-001_L.doc