System Configuration; Configure Interface Modules (Port Cards) (F4-Portcard Configuration Display And Administration) - Polycom SpectraLink 6300 MCU Manual

System Configuration

Configure Interface Modules (Port Cards)
(F4-Portcard Configuration Display
and Administration)
PN: 1725-36125-001_L.doc
System configuration can be done after the System Controller card is
installed in the MCU. Other cards do not need to be physically
installed in order to perform this configuration. System configuration
includes these tasks:
Configure Interface Modules
system to which the Interface Module is connected, associating the
handset serial numbers and user information with a line on the wired
telephone system, and input Base Station information.
(F8) Setting the system's frequency and timing
Configure MCU
parameters.
(F6) Defining the features and functions accessed by
Program Macros
the key on the handsets.
FCN
(F9) Defining the default messages that will display on
Program Menus
the handset.
This option allows you to define the type of host telephone system to
which the Interface Module (port card) connects and input or edit
information about lines and Base Stations (RCUs). The function also
allows you to search line and RCU information for specific data.
Searching or selecting a specific shelf or port
When you press to enter
F4
, the system displays either the last Interface Module that
Administration
was displayed or the search submenu (
). Use the submenu to find the shelf or port you want to
Module)
configure. Press Enter to display the submenu as needed.
(F4) Defining the type of host telephone
Portcard Configuration Display and
Select Cabinet/Portcard (Interface
2
15