Backups; Dump Config To Disk; Restore Config - Polycom SpectraLink 6300 MCU Manual

Backups

Dump Config to Disk

Restore Config

PN: 1725-36125-001_L.doc
System configuration information is stored in the System Controller
card. The system automatically transfers config information to the
controller when updates are made. However, it does not
automatically save a copy to the Operator's Console PC.
If the System Controller card fails and there is no backup on the
PC, all handsets and Base Stations will need to be re-registered.
Backups to the PC should be done at the completion of installation,
and periodically (especially if major changes are made) after
installation.
1. From the
Supervisor State Display
the menu.
2. Scroll down to
Dump Config to PCS.CFG
will copy the configuration to a file called PCS.CFG, and save it in
your working directory. If a PCS.CFG file already exists, the
system prompts to see if you want to overwrite it.
3. Copy the file to a diskette for safekeeping.
In the event of a system failure that results in replacement of the
System Controller card, the configuration will need to be restored
from file or disk.
1. From the
Supervisor State Display
the menu.
2. Scroll down to
Restore Config from PCS.CFG
system will copy the configuration from PCS.CFG in your
working directory to the System Controller card.
screen (F1) press Enter to display
and press Enter. The system
screen (F1) press Enter to display
and press Enter. The
5
57