Program Com Ports (F10-Com Port Administration) - Polycom SpectraLink 6300 MCU Manual

Program COM Ports
(F10-COM Port Administration)
PN: 1725-36125-001_L.doc
Enter to select it.
Disable
for new user defaults; or
settings. Default factory settings for each switch are listed below.
Press the right arrow key to display a menu of choices. Use
Delay
the arrow keys to highlight the setting, and press Enter to select it.
Select if your digital host telephone supports softkeys (e.g.,
Yes
DEFINITY, Mitel, Norstar), otherwise select
If is selected the system requires the user to press
Yes
before the menu displays, allowing the first press of the
access softkey functions. If
at the first key press.
FCN
Screens 1 through 4
abbreviations to be displayed on each menu. Be sure your entries
correspond to the system macros (analog systems) or the
telephone system programming (digital systems). If you are
assigning OAI features, be sure the key was defined as an OAI key
in the system macros.
3. Select to save the entries.
SAVE
You cannot customize more than one menu per PBX type.
Telephone menu factory defaults
See the appropriate LinkPlus Interface Guide for the default menu
settings.
There are two RS-232 COM ports on the System Controller and one on
each Expansion Shelf Controller. Each COM port can be assigned one
administrative function.
1. Press F10 to enter the
allows you to assign one, and only one, function to each COM
port.
2. Use the arrow keys or mouse to highlight the COM port to be
configured. The COM port on the right side of the screen for Shelf
will turn this menu off;
will assign the factory default
Factory
is selected the user menu displays
No
Type the key number and the feature
FCN
COM Port Administration
System Configuration
will prompt
User
.
No
twice
FCN
key to
FCN
function. The screen
27