Polycom SpectraLink 6300 MCU Manual page 53

Diagnostic Procedures
The following shows sample results for one Base Station.
Listening Base Station
The first two lines of the report show configuration information about
the listening Base Station, including port location, name (note), offset,
and whether or not the Base Station is isolated. If a listening Base
Station which is not isolated has no information from other Base
Stations, this indicates a problem.
Heard Base Station
The next section of the report shows signaling information for each
Base Station heard by the listening Base Station.
Signal level
This is the most important information from the heard Base Station.
This is the signal from the Base Station that was heard by the listening
Base Station, converted to an equivalent level in dBm. The same
values in hexadecimal (in the range 00 to FF) are also shown next to
the dBm value.
PN: 1725-36125-001_L.doc 53