Portcard State Display(F2) - Polycom SpectraLink 6300 MCU Manual

Portcard State Display(F2)

PN: 1725-36125-001_L.doc
This screen shows detailed information about the Interface Module
(port card). The Interface Module's shelf and slot are shown on the
top line, followed by the
about the Lines and Base Stations (RCUs).
To see detailed information about any line or Base Station (RCU),
highlight the or
Line RCU
option to search for or select a specific card. See
Cabinet/Portcard
Chapter 2 System Configuration, section Configure Interface Modules
(Port Cards)
(F4-Portcard Configuration Display
and Administration).
Line and Base Station information (left-hand columns)
Indicates the seven-day period for which data is currently
Period
being saved, and the number of seven-day periods for which
historical data exists.
Screen displays the following information for each line (
Lines
through ): Port #, State, # of Resyncs, # of times Full, # of Calls in, #
16
number. Under this is information
Period
and press Enter. You can also use the
System Status
Select
1
43