Configure Mcu (F8-Configuration Display And Administration) - Polycom SpectraLink 6300 MCU Manual

Configure MCU
(F8-Configuration Display and Administration)
PN: 1725-36125-001_L.doc
3. A pop-up screen prompts you to select a new shelf (cabinet) slot,
and port location.
The cable connecting the line or Base Station to the port must also
be moved, if required.
Move Port Card (Interface Module)
This option lets you move an entire Interface Module (port card).
1. From the
Portcard Configuration
2. Select the
Move Portcard
3. A pop-up screen prompts you to select a new shelf (cabinet) and
slot location.
You cannot move an Interface Module to a slot which already
contains configuration information. Also, the Interface Module must
be physically moved to the new slot and connected with a cable in
order for the module to become operational.
This function sets the system's frequency and timeout parameters.
screen (F4), press Enter.
option.
System Configuration
21