Polycom SpectraLink 6300 MCU Manual page 42

SpectraLink 6300 MCU: Operator's Console: SpectraLink 6000 System
42
Highest level reached in T1 RX queue and number of times
T1 RX
queue overflowed.
Highest level reached in T1 TX queue and number of times
T1 TX
queue overflowed.
Number of T1 A/B IPC CRC errors.
T1 CRC
umber of T1 A/B IPC overrun errors.
T1 OVR
Number of T1 A/B IPC underrun errors.
T1 UNR
Number of T1 A/B IPC slip errors.
T1 SLP
Highest level reached in main queue and number of times
Main
queue overflowed.
Highest level reached in time queue and number of times queue
Time
overflowed.
Clear Remote Card alarms
1. From the
Supervisor State Display
highlight the number of the shelf to be checked, and press Enter.
2. Select Remotecard Options.
Select
—
Clear Near Remote Card Alarm
Remote card at the local site.
Select
—
Clear Far Remote Card Alarm
Remote card at the remote site.
Reset T1 Remote Module
1. From the
Supervisor State Display
highlight the number of the shelf to be checked, and press Enter.
2. Select Remotecard Options.
Select
—
Reset Near Remote Card
local site. Note: Resetting the Near Remote Card will
automatically reset the Far Remote Card.
Select
—
Reset Far Remote Card
remote site.
(F1) menu, use the arrow keys to
to clear alarms on the T1
to clear alarms on the T1
(F1) menu, use the arrow keys to
to reset the T1 remote card at the
to reset the T1 Remote card at the
PN: 1725-36125-001_L.doc