Polycom SpectraLink 6300 MCU Manual page 24

SpectraLink 6300 MCU: Operator's Console: SpectraLink 6000 System
24
2. Use the arrow keys or mouse to move to the desired entry, and
press nter.
E
3. In the menu, type in the new macro characters for this digit or
function, then select
4. To assign a function key to initiate the OAI application, enter
as the macro sequence. When the related function key is
##555
pressed, the OAI application will recognize the key sequence and
initiate the appropriate OAI application.
The OAI macro can be programmed to more than one key sequence to
support multiple OAI functions within the same application. The
application must then be able to distinguish which key sequence is
assigned to which function.
If you customize the handset menus, the features defined on the
custom menu should match the system macro. For example, if you
FCN 2
define on the Analog Function Menus as Xfer, you must also
FCN 2
define on the Macros Menu as Xfer.
FCN 1
is assigned to the Mute function on all handsets.
Examples of Macro programming
Transfer
To assign Transfer to
is accessed using on the wired phone system:
*42
to save.
SAVE
on the handset when the Transfer feature
FCN 4
PN: 1725-36125-001_L.doc