Polycom SpectraLink 6300 MCU Manual page 45

System Status
Access to diagnostic information. Use by Polycom
Advanced Functions
engineering.
Allows you to search for a particular cabinet,
Select Cabinet/Portcard
line or Base Station. See Chapter 2 System Configuration, section
Configure Interface Modules (Port Cards)
(F4-Portcard Configuration Display
and Administration).
Show line detail
This option shows the detail for a specific line. Highlight a specific
line on the and press Enter; or use the
Portcard State Display Select
function to search for a specific line.
Cabinet
The port location of this line.
Line
Indicates the seven-day period for which data is currently
Period
being shown, and the number of seven-day periods for which
historical data exists.
Serial number of this wireless handset.
PT Serial
User name or any other information.
Note
Extension number or SPID (ISDN).
Extension
if in use; if powered off; if turned on and not in use.
State Active Off Idle
Shows alarm if the handset associated with the line is in alarm.
Alarm
Digital interface only.
If active, the Base Station the telephone is communicating with.
RCU
PN: 1725-36125-001_L.doc 45