Program Mcu Macros (F6-Mcu Macros Display) - Polycom SpectraLink 6300 MCU Manual

Program MCU Macros
(F6-MCU Macros Display)
PN: 1725-36125-001_L.doc
(analog only) The level which filters the initial
First Ring Filter
spurious ring signals. Value depends on the requirements of the
host telephone system.
Sets the time zone of the SpectraLink 6000 System.
Time Zone
Master Clock Cabinet
T1 facilities are Network Clocked, this field is used to designate
one shelf as the Master Clock Source.
In a system connected via T1 facilities, GPS
Local GPS Cabinet
timing may be required when remote and main shelves are within
600 to 800 feet of one another. This field is used to designate the
cabinet that controls the GPS timing.
(analog only) The level which filters spurious ring
All Ring Filter
signals. Value depends on the requirements of the host telephone
system.
To disable, enter
Echo Suppression
3. Select to save the entries.
SAVE
See the LinkPlus Interface Guide for Analog Systems for additional
information about planning and programming the interface.
Macros apply only to analog interfaces and Open Application
Interface (OAI) function key assignments.
1. Press F6 to enter the
screen displays. The screen allows you to define macros that
correspond to pressing the
digits through
1 9
In a system connected via T1 facilities, if the
(zero).
0
MCU Macros Display
key on the handset plus one of the
FCN
, , , and .
* 0 #
System Configuration
function. The following
23