Polycom SpectraLink 6300 MCU Manual page 17

PN: 1725-36125-001_L.doc
Configure lines for handsets
This procedure associates a handset, identified by its serial number,
with a specific port location. Refer to the completed Extension
Assignments Worksheet from SpectraLink 6300 MCU: Installation for
serial numbers, user names, and extensions.
1. Using the arrow keys or mouse, position the cursor on the port
location to be configured, and press Enter.
2. When the menu displays, scroll down to
3. At the pop-up menu, type the information for each handset. The
following screen shows the pop-up menu.
System Configuration
, and press Enter.
Edit Line
17