Program Telephone Menus (F9-Pt Menu Administration) - Polycom SpectraLink 6300 MCU Manual

Program Telephone Menus
(F9-PT Menu Administration)
PN: 1725-36125-001_L.doc
On the Macro definition screen, enter the following sequence next to
, as shown in the sample screen above:
4
*42
Speed dial
To have dial
FCN 8 555-1234
line by dialing and wait for dial tone, then dial the call.
9
On the Macro definition screen, enter the following sequence next to
:
8
9,,5551234
The number of pause entries (commas) depends upon how quickly
your telephone system accesses outside dial tone.
OAI
To have access the OAI interface:
FCN *
On the Macro definition screen, enter the following sequence next to
:
*
##555
Clear or erase a macro function
1. Use the arrow keys or mouse to move to the desired entry, and
press .
Enter
2. Select from the menu.
DELETE
The handset displays a menu of functions to prompt users. The
system is shipped with a standard menu of features most commonly
accessed by users of the host telephone system(s) supported. You can
customize one (and only one) menu for each type of host telephone
system at your location, up to a maximum of eight menus. All
handsets assigned to a specific type of host telephone system will use
the same custom menu.
• For analog interfaces, the features defined for the custom menus
should match the System Macro defined in Program MCU
when the system must access an outside
System Configuration
25