Remote Card Options - Polycom SpectraLink 6300 MCU Manual

SpectraLink 6300 MCU: Operator's Console: SpectraLink 6000 System

Remote Card Options

40
If the system has T1 remote cards installed, select
from the submenu to display information about the cards. The
following options are available.
Show Remotecard Detail
remote cards (near and far).
Edit Remote Cabinet Configuration
T1 connections and synchronization. See SpectraLink 6300 MCU: T1
Remote Module Installation for more information.
Clear Near Remote Card Alarm
card.
Clear Far Remote Card Alarm
Reset Near Remote Card
Resets on the far-end remote card.
Reset Far Remote Card
Remotecard (Shelf) detail
To display details for the Remote Shelf:
1. From the
Supervisor State Display
menu of options.
2. Highlight the remote card to be displayed and select
.
Options
3. Select
Show Remotecard Detail
Displays detailed information about the T1
Input or change information about the
Clears alarms on the near-end remote
Clears alarms on the far-end remote card.
Resets the near-end remote card.
screen (F1) press Enter to display a
. The following screen displays.
Remotecard Options
Remotecard
PN: 1725-36125-001_L.doc