Table of Contents
Advertisement
6
MENU SCREEN
Bluetooth
Bluetooth
Turns the Bluetooth
®
function ON or OFF�
• OFF: Turns OFF the function�
• ON:
Turns ON the function�
Bluetooth Reset
Initializes the Bluetooth
Only when the Bluetooth
can be done
Bluetooth Audio Setting
Selects the AF Output device when a Bluetooth
headset is connected�
• BT Only: Sets the Bluetooth
Output device�
• BT & SP: Sets the Bluetooth
transceiver's speaker as the AF Output
devices�
Bluetooth Auto Connect
Select whether or not to automatically connect to a
paired Bluetooth
®
device when its power is turned ON�
• OFF: Does not connect to the last connected
device�
• ON:
Automatically connects to the last connected
device�
NOTE: The transceiver connects to the last
connected device, if the connecting operation is
performed on the device side, even if this item is set
to OFF�
BT Device Info
Displays the installed Bluetooth
supported profile, and its version information.
BT Device List
Displays the paired Bluetooth
To find other Bluetooth
®
L See pages 11-6 and 11-9 for details�
Key Beep (VS-3)
Sets the beep sound when the optional VS-3
Bluetooth
®
Custom Key ([PLAY]/[FWD]/
headset
[RWD]) is pushed�
• OFF: No beep sounds�
• ON:
A beep sounds�
®
unit�
®
function is OFF, initialization
®
headset as the AF
®
headset and the
®
unit name, address,
®
devices�
device, select "Find Device�"
P.Save (VS-3)
Selects whether to operate in the Bluetooth
headset's Battery Saving mode when the optional
VS-3 Bluetooth
Power Save is activated, the user cannot use the VOX
function�
NOTE: When a third-party headset or a data device
is connected, this function is automatically set to
OFF, even if this item is set to ON�
®
• OFF: Turns OFF the function�
• ON:
The Power Save mode is enabled when no
communication or operation is performed for
120 seconds�
PTT Beep (VS-3)
Sets the beep sound when [PTT] is pushed on the
optional VS-3 Bluetooth
• OFF: No beep sounds�
• ON:
A beep sounds�
One-touch PTT
Sets the One-Touch PTT function when the Bluetooth
headset is connected� The function enables a user to
transmit without continuously holding down [PTT]�
NOTE: When a third-party headset is connected, this
function may automatically be set to ON, even if this
item is set to OFF�
• OFF: Push [PTT] to transmit, then release to
receive�
• ON:
Push [PTT] to transmit, then push again to
receive�
Waiting Pairing
Enters the pairing request wait mode� The transceiver
waits for a pairing request from a Bluetooth
6-17
®
is connected� When the
headset
®
�
headset
®
®
®
device�
Advertisement
Table of Contents
