Control Head - Icom IC-F5400DP Series Operating Manual

6
MENU SCREEN

Control Head

NOTE: These settings are settable only when
connecting 2 control heads using the RMK-7
-
dual head separation kit
*�
microphone
* RMK-5
separation kit
transceiver�
Intercom (For the Mobile types)
Turns the Intercom function ON or OFF�
When this function is ON, the users can communicate
each other through their control head's microphones�
L While communicating using the Intercom function, you
can use only [PTT] and [VOL]�
1� Select "Intercom," and then push [OK]�
• The Intercom function turns ON�
2� Hold down or release [PTT] to communicate�
3� Push [OK] to turn OFF the Intercom function�
Hanger (For the Mobile types)
Selects which control head, or simply select both
control heads, to automatically start scanning after
putting the microphone in the hanger (on-Hook)�
L To use this function, turn ON the Hook Scan function in
the "Functions" category�
L Other Hanger actions can be set in the CS-F3400DP
programming software
• HEAD 1 & HEAD 2: Automatically starts scanning
after putting both microphones
in their hangers�
• HEAD 1: Automatically starts scanning
after putting the microphone in
the CONTROL HEAD 1 hanger�
• HEAD 2: Automatically starts scanning
after putting the microphone in
the CONTROL HEAD 2 hanger�
TX AF Monitor (For the Mobile types)
Turns the TX AF Monitor function ON or OFF�
When this function is ON, the user can monitor the
audio that is transmitted on the other control head�
SP Link (For the Mobile types)
Turns the SP Link function ON or OFF�
When this function is ON, the audio volume settings
between the two control heads are linked�
• OFF: The audio volume settings are not linked,
and are individually set at each control
head�
• HEAD 1: The audio volume settings are linked, and
are equally set on CONTROL HEAD 1�
• HEAD 2: The audio volume settings are linked, and
are equally set on CONTROL HEAD 2�
or HM-218
hand
is required to connect to the
.
Primary Mic (For the Mobile types)
Selects which control head's microphone to use when
transmitting without pushing [PTT], such as when
using the Auto TX function or PC commands�
• Options: HEAD 1, HEAD 2
Head SP Out (For the Mobile types)
Selects whether or not to output the audio from the
control head�
L The user can individually set to each control head, and
also the HM-218�
• OFF: The audio is output from an external speaker�
• ON: The audio is output from the control head's
front speaker or from the HM-218�
6-22