Table of Contents
Advertisement
7
dPMR™ OPERATION
Receiving a call
D Receiving an Individual call
1� When an Individual call is received:
• Beeps sound�
• "
" is displayed and the mute is released�*
• "
" may be displayed or blink, depending on the
presetting�*
• The Status indicator lights green�
• "Private Call" and the calling station name (or ID) are
displayed while receiving the signal�*
2� Hold down [PTT] and speak at your normal voice
level� Release [PTT] to receive�
3� After the communication is finished, push [Back]�
• The transceiver sends a Disconnect signal to
terminate the call�
• "
" disappears, and "Clear Down" is displayed for
approximately 2 seconds�*
L Either station can send a Disconnect signal�
L The transceiver returns to the Standby mode�
D Receiving a Talkgroup call
1� When a Talkgroup call is received:
• Beeps sound�
• "
" is displayed and the mute is released�*
• "
" may be displayed or blink, depending on the
presetting�*
• The Status indicator lights green�
• The Talkgroup name and the calling station name (or
ID) are displayed while receiving the signal�*
L When an All Call is received, "All Call" is displayed
instead of the Talkgroup name�*
2� Hold down [PTT] and speak at your normal voice
level� Release [PTT] to receive�
NOTE: Only one station is allowed to speak at
the same time�
3� After the communication is finished, push [Back]�
• The transceiver sends a Disconnect signal to
terminate the call�
• "
" disappears, and "Clear Down" is displayed for
approximately 2 seconds�*
L Only the caller station can send a Disconnect signal�
L The transceiver returns to the Standby mode�
D Receiving a Status message
1� When a Status message is received:
• Beeps sound�
• The Status message and the calling station or Group
name (or ID) are displayed�*
• "
" blinks�*
• Portable type transceivers may vibrate, depending on
the presetting�
2� Push [Back] to stop the display indication�
D Receiving a Message
1� When a Message is received:
• Beeps sound�
• The Message and the calling station or Group name
(or ID) are displayed�*
• "
" blinks�*
• Portable type transceivers may vibrate, depending on
the presetting�
2� Push [Back] to stop the display indication�
* Only for the Portable Ten-key and Simple key types and the
Mobile LCD types�
7-14
Advertisement
Table of Contents
