Icom IC-F5400DP Series Operating Manual page 27

2
PANEL DESCRIPTION
Assignable Software key functions
D For keys and keypads (Continued)
Category: Channel/Scan (Voting) (Continued)
Scrambler/Encryption
In the Analog mode
Push to turn the Voice Scrambler function ON or OFF
L The Voice Scrambler function provides private
communication between stations by using a scrambled
code
In the Digital mode
Push to turn the Encryption function ON or OFF
L The Voice or Data Encryption function provides private
communication between stations by using an Encryption
Key and Key ID
Compander
In the Analog mode
Push to turn the Compander function ON or OFF
L The Compander function reduces noise components on
the transmit audio to provide clear communication
Category: Signaling/Call
Call
Push to make a call to the preset destination in the
channel
Call A/Call B
In the Analog mode
Push to transmit a preset 2/5-Tone code or BIIS Call
Setup to the preset destination
In the Digital mode
Push to transmit a Call Setup to the preset
destination
Re-dial
Push to send the last transmitted DTMF code number
L Redial will be cleared when the transceiver is turned OFF
once
Call List Select
1 Push to display the "Call List" screen
2 Push [Up] or [Down] to select an ID name (or ID
code)
3 After selecting, push [OK] to set, and return to the
Standby mode
Call Menu
1 Push to display the "Call Menu" screen
2 Push [Up] or [Down] to select an ID name (or ID
code)
3 After selecting, push [OK] to set, and display the
call function screen
4 Push [Up] or [Down] to select a call function
L See 'Transmitting a call' on sections 7 and 8 for
details
5 After selecting, push [PTT] to make a call to the
selected station or group
DTMF Autodial
z Push to display the "DTMF Autodial" screen Then,
push [Up] or [Down] to select a DTMF code After
selecting, push [PTT] to transmit the selected DTMF
code
z While in the Standby mode, hold down for 1 second
to transmit the currently selected DTMF code
2-19