Icom IC-F5400DP Series Operating Manual page 177

13
OTHERS
Copying data from a transceiver
D Copying data (Continued)
Master: Portable Non-display types
Step 1: Entering the Programming mode (Master)
1� Set [Selector] to Channel 16.
2� While holding down [F2] and [F3], turn ON the
transceiver. Continue holding down [F2] and [F3]
for about 3 seconds.
• 2 beeps sound.
• The transceiver enters the Programming mode.
Step 2: Turning ON the transceiver
Step 3: Copying data
Push the [PTT] to start copying data to the Sub
transceiver�
Step 4: Complete
After copying is completed, the Master and Sub
transceivers automatically restart.
• The user can operate the Sub transceiver with the loaded
data.
[PTT]
[F2]
[F3]
(Sub)
(Master)
(Master/Sub)
[Selector]
[VOL]
Master: Mobile Segment types
Step 1: Entering the Programming mode (Master)
1� While holding down [F2] and [F3], turn ON the
transceiver. Continue holding down [F2] and [F3]
for about 3 seconds.
• 2 beeps sound.
• The transceiver enters the Programming mode.
2� Hold down [F1] for 1 second to enter the Set mode.
3� Push [F2] or [F3] to select the "C0" screen.
• The transceiver enters the Programming mode.
Step 2: Turning ON the transceiver
Step 3: Copying data
Push the Power key to start copying data to the Sub
transceiver�
Step 4: Complete
After copying is completed, the Master and Sub
transceivers automatically restart.
• The user can operate the Sub transceiver with the loaded
data.
F1
[F1] [F2] [F3]
13-5
(Master/Sub)
F2 F3
Power key
(Sub)
(Master)