Customizing The Channel Announcement; D Customizing The Channel Announcement; D Returning To The Default Setting - Icom IC-F5400DP Series Operating Manual

13
OTHERS

Customizing the channel announcement

You can change the channel announcement to suit
your operating needs. The channel announcement
customizing is convenient for the localization by using
your local languages.

D Customizing the channel announcement

1� Connect a transceiver to your PC using a USB
cable.
2� Set the USB Mode Select to "Card Reader."
(Menu > Function > USB Mode Select)
3� Open the Announce folder according to the
instructions on page 9-8.
4� Save announcement files in the Announce folder
using your PC.
NOTE: The announcement files have to satisfy
the following conditions.
The file format is "wav."
• 16 bit
• Sampling frequency: 8 kHz
• Number of channel: mono
The file is named as
• "Announce_Channel_xxx_yyy.wav" for the
transceivers with an LCD.
• "Announce_Position_zz.wav" for the
transceivers without an LCD.
L xxx: Zone number, yyy: Channel number,
zz: [Selector]ʼs position
5� Set the USB Mode Select to "Data Transfer."
(Menu > Function > USB Mode Select)
6� Turn OFF the transceiver�
7� Turn ON the transceiver.
• The entered announcement is made.

D Returning to the default setting

1� Connect a transceiver to your PC using a USB
cable.
2� Set the USB Mode Select to "Card Reader."
(Menu > Function > USB Mode Select)
3� Open the Announce folder according to the
instructions on page 9-8.
4� Delete the announcement files from the Announce
folder.
5� Set the USB Mode Select to "Data Transfer."
(Menu > Function > USB Mode Select)
6� Turn OFF the transceiver�
7� Turn ON the transceiver.
• Returns to the default announcement.
13-7