D Rewriting The Priority A Or B Channel; D Selecting A Continuous Tone Channel - Icom IC-F5400DP Series Operating Manual

3
BASIC OPERATION
Selecting a channel

D Rewriting the Priority A or B channel

<Key operation>
Portable: For all types
Mobile: For all type
1� Select a channel to be set as the Priority A or B
channel� (p� 3-4)
2� Hold down [Prio A (Rewrite)] or [Prio B (Rewrite)]
for 1 second�
• Sets the selected channel as the Priority A or B
channel�
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Channel/Scan > Prio A (Rewrite))
(Menu > Channel/Scan > Prio B (Rewrite))
1� Select a desired channel to be set as the Priority
A or B channel� (p� 3-4)
2� Push [Menu] to display the "Menu" screen�
3� Push [Left] or [Right] to select "Channel/Scan,"
then push [OK]�
4� Push [Up] or [Down] to select "Prio A (Rewrite)" or
"Prio B (Rewrite)�"
5� Push [OK]�
• Sets the selected channel as the Priority A or B
channel�

D Selecting a Continuous tone channel

<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
1� While in the Analog mode, push [C.Tone CH
Select] to display the "C�Tone CH Select" screen�
2� Push [Up] or [Down] to select a Continuous tone
channel, then push [OK].
• Sets the selected channel�
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Channel/Scan > C.Tone CH Select)
1� While in the Analog mode, push [Menu] to display
the "Menu" screen�
2� Push [Left] or [Right] to select "Channel/Scan,"
then push [OK]�
3� Push [Up] or [Down] to select "C.Tone CH Select,"
then push [OK]�
• Displays the "C�Tone CH Select" screen�
4� Push [Up] or [Down] to select a Continuous tone
channel, then push [OK].
• Sets the selected channel�
5� Hold down [Back] for 1 second to return to the
standby screen�
• The selected Continuous tone channel number is
displayed�
3-5