Table of Contents
Advertisement
6
MENU SCREEN
Sensor
Man down Angle (For the Portable types)
Sets the Emergency mode detection angle for the
Man Down function� If the transceiver leans past the
set angle for the ON Timer time period, the transceiver
enters the Emergency mode, and then a countdown
starts�
• Options: 45, 60, or 75 degrees
Motion Sense (For the Portable types)
Sets the acceleration sensor sensitivity to detect
whether the user is moving or not, for the Motion
Detection function� This setting is for the Motion
Detection function, and it determines the acceleration
threshold level to activate the Motion Detection Timer�
• Range: 1 (high sensitivity) ~ 10 (low sensitivity)�
L If you set a lower level, the transceiver will enter the
Emergency mode more easily�
Stationary Sense (For the Portable types)
Sets the acceleration sensor sensitivity to detect if the
user is stationary or not for the Stationary Detection
function� This setting is used for the Stationary
Detection function, and it determines the acceleration
threshold level to activate the Stationary Detection's
ON Timer (Sec)�
• Range: 1 (high sensitivity) ~ 10 (low sensitivity)�
L If you set at a higher level, the transceiver will enter the
Emergency mode more easily�
• Sensitivity example
Display
Backlight
Sets the Key Backlight status�
For the Portable types
• OFF: Turns the display backlight continuously OFF�
• Auto: When any key except [PTT] is pushed, the
backlight lights for 5 seconds�
• ON: Turns the backlight continuously ON�
For the Mobile types
• OFF: Turns the display backlight continuously OFF�
• Auto: Turns the backlight continuously ON with the
Brightness setting level�
When the Dimmer terminal of the D-Sub 25 pin
or Option Connector 22 pin is activated, the
backlight lights dimly with the Dimmer setting
level�
• ON: Turns the backlight continuously ON with the
Brightness setting level�
Brightness
Sets the LCD brightness level�
• Range: 0 (the lowest) ~ 7 (the highest)
Dimmer
Sets the LCD dimmer level�
• Range: 0 (the lowest) ~ 7 (the highest)
NOTE: It is recommended to be the Dimmer level
lower than the Brightness level�
LCD Color Test
10
Checks whether or not the LCD displays color
correctly�
LCD Mode
9
Sets the LCD Mode�
• Day: The LCD is set to the Day mode�
8
7
• Night: The LCD is set to the Night mode�
6
5
4
3
2
1
6-19
The Day mode is for daytime operation, and
the display backlight color is set to white�
The Night mode is for nighttime operation,
and the display backlight color is set to black�
Advertisement
Table of Contents
