Icom IC-F5400DP Series Operating Manual page 147

11
Bluetooth ® OPERATION
Pairing with a headset
Step 4: Connecting to the headset
1� Push [Up] or [Down] to select the headset to
connect, then push [OK]�
• Connects to the headset�
2� After the transceiver and the headset connection
has succeeded, "" is displayed beside the
headset icon�
3� Hold down [Back] for 1 second to return to the
standby screen�
• While connected to a Bluetooth
displayed instead of " �"
TIP: When you turn ON the transceiver, with the
"Auto Connect" item is set to ON, the transceiver
automatically connects to the last paired device�
After connecting, " " is displayed instead of " �"
NOTE: The transceiver connects to the last
connected device, if the connecting operation is
performed on the device side, even if the "Auto
Connect" item is set to OFF�
(Transceiver)
® headset, " " is
11-7