Headset Settings; D Af Output; (Menu > Bluetooth > Bt Audio Setting); D About The Vs-3 Headset - Icom IC-F5400DP Series Operating Manual

11
Bluetooth ® OPERATION

Headset settings

D AF Output

(Menu > Bluetooth > BT Audio Setting)
You can set the audio output device when a
Bluetooth headset is connected�
®
If the "BT Audio Setting" item is set to "BT & SP," you
can hear audio from both a connected Bluetooth
headset and the transceiver's speaker�
See page 6-17 for details�

D About the VS-3 headset

You can set the detailed settings of the optional VS-3
�
Bluetooth ®
headset
• Key Beep (p� 6-17)
(Menu > Bluetooth > Key Beep (VS-3))
Set a beep to sound when you push [PLAY], [FWD] or
[RWD] on the VS-3� This setting is different from the
transceiver's beep setting� When both settings are set
to "ON," the beeps sound on the transceiver and the
headset�
• Power Save (p� 6-17)
(Menu > Bluetooth > P.Save (VS-3))
The Power Save function temporarily disconnects
the Bluetooth ® connection if no communication or
operation is performed for 120 seconds, to prolong the
VS-3's battery life�
• PTT Beep (p� 6-17)
(Menu > Bluetooth > PTT Beep (VS-3))
Set a beep to sound when you push [PTT] on the VS-
3� This setting is different from the transceiver's beep
setting� When both settings are set to "ON," the beeps
sound on the transceiver and the headset�
• One-touch PTT (p� 6-17)
(Menu > Bluetooth > One-touch PTT)
The One-Touch PTT function enables you to toggle
between transmit and receive by pushing [PTT]�
®
11-8