Selecting A Scan List - Icom IC-F5400DP Series Operating Manual

5
SCAN OPERATION

Selecting a Scan list

You can select a Scan list to be scanned�
Channels included in the selected Scan list are
scanned during a scan�
When selecting a zone type Scan list, the channels
that are in the same zone as the Scan start channel
will be scanned�
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
1� Hold down [Scan Start/Stop] for 1 second to
display the "Scan List" screen�
2� Push [Up] or [Down] to select a list, then push
[OK]�
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Channel/Scan > Scan List)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select "Channel/Scan,"
then push [OK]�
3� Push [Up] or [Down] to select "Scan List," then
push [OK]�
• Displays the "Scan List" screen�
4� Push [Up] or [Down] to select a list, then push
[OK]�
5� Hold down [Back] for 1 second to return to the
standby screen�
5-4