Pairing With A Headset - Icom IC-F5400DP Series Operating Manual

11
Bluetooth ® OPERATION

Pairing with a headset

This section describes how to pair with a Bluetooth
headset using the Portable Ten-key and the Simple
key types or Mobile LCD types�
NOTE: For the Portable Non-display type and
Mobile Segment type
To pair with a headset, see page 11-4 for details�
Step 1: Entering the Pairing mode
L See the headset's instruction manual for details�
Step 2: Turning ON the Bluetooth
L See page 11-3 for details�
Step 3: Searching for the headset
1� Push [Menu] to display the "Menu" screen�
2� Push [Left] or [Right] to select "Bluetooth," then
push [OK]�
3� Push [Up] or [Down] to select "BT Device List,"
then push [OK]�
4� Push [Up] or [Down] to select "Find Device," then
push [OK]�
TIP: If the transceiver has been connected to the
Bluetooth ® device before, its name may be displayed
in step 4� In that case, push [Up] or [Down] to select
it, then push [OK] to connect�
®
(Headset)
® function
(Transceiver)
(Transceiver)
11-6
5� Push [Up] or [Down] to select "Headset," then
push [OK] to start searching�
6� When pairable headsets are found, their names
are displayed on the screen�
TIP:Ifthetransceivercannotfi  ndanypairable
headsets, the following screen is displayed� In that
case, do step 4 to search for a headset again�
► Continued on the next page�