Call Procedure - Icom IC-F5400DP Series Operating Manual

3
BASIC OPERATION

Call procedure

When your system uses tone signaling (except
CTCSS and DTCS), a call procedure may be
necessary prior to voice transmission� The tone
signaling employed may be a selective calling system,
which enables you to call only specific stations, and
prevents unwanted stations from contacting you�
1� Select a channel according to your system
operator's instructions.
• This may not be necessary, depending on the
presetting�
• Refer to page 3-4 for details�
2� Push [Call]�
3� After transmitting, the remainder of your
communication can be carried out in the normal
way�
Selective calling
The illustration is of the Ten-key type transceivers�
3-7
Non-selective calling