Selecting A Scan List - Icom iF4261DT Operating Manual

Previous view
6
SCAN OPERATION

Selecting a Scan list

You can select a Scan list to be scanned.
Channels included in the selected Scan list are
scanned during a scan.
When selecting a zone type Scan list, the channels
that are in the same zone as the Scan start channel
will be scanned.
<Key operation>
1. Hold down [Scan Start/Stop] for 1 second to
display the scan list.
Portable
SCAN1
MENU SCAN SCAD LONE SCAD
Mobile
S C A N 1
2. Push [CH Up] or [CH Down] to select a list, then
push [Scan Start/Stop] again to save, and return
to the Standby mode.
Portable
SCAN2
MENU SCAN SCAD LONE SCAD
Mobile
S C A N 2
<Menu operation>
TIP: The Portable type transceiver's operations are
described in red. And the Mobile type transceiver's
operations are described in blue.
LThe common operations are in black.
(MENU > SCAN > SELECT)
1. Push [Menu] to display the Menu screen.
2. Push [P2](Ω) or [P3](≈)
select "SCAN," and then push
Portable
SCAN
BACK ENT
Mobile
M E N U
S C A N
3. Push [P2](Ω) or [P3](≈)
select "SELECT," and then push
[P2].
Portable
SCAN
SELECT
BACK ENT
Mobile
S C A N
S E L E C T
• Displays the Scan list.
6-4
or [ΩP3] or [P4≈] to
[P1](ENT) or [P2].
or [ΩP3] or [P4≈] to
[P1](ENT) or
☞ Continued on the next page.