Setting Measurement Items; Measuring The Height - Omron ZW-XC7 User Manual

8-7 Setting Measurement Items

Measuring the Height

Measuring the Height p.104
As an example, here is an explanation of the procedure for measuring the height of the surface (2nd surface)
below a transparent object (as shown in the diagram on p.104).
Operating procedure
Steps Key operation
1
2
3
4
5
6
7
198

Setting Measurement Items

Display Description
Press and hold the
mode.
Press the
Press the
Press the
Press the
key.
Select the measurement surface.
EDGE1 to EDGE4: 1st surface to 4th surface
PEAK: Peak
"SUR" is displayed on the main display and the current setting value
is displayed on the sub-display.
Press
In this example, select "EDGE2" and press the
Press the
key for two seconds to enter the FUNC
/ key to select MEAS, then press the
/ key to select TASK1, then press the
/ keys to select "ITEM" and press the
/ keys to select "HEIGHT" and press the
/ key to enter editing mode and the sub-display blinks.
key for two seconds to enter the RUN mode.
key.
key.
key.
key.
ZW-7000 User's Manual