Omron ZW-XC7 User Manual page 195

Changing Threshold Values
The threshold value for the task displayed on the main display in the RUN mode can be changed.
Important
To change the target task, change the task displayed on the main display.
Changing Display Details p.192
As an example, here is an explanation of the procedure for setting the HIGH threshold value by entering
"1.000" directly.
Operating procedure
Steps Key operation
1
2
3
4
ZW-7000 User's Manual
Display Description
Press the
menu.
Press the
key.
Set "1.000" as the HIGH threshold value.
The current measured value is displayed on the main display and the
current set threshold value is displayed on the sub-display. (At this
time, the THRESHOLD-H indicator lights up.)
Press
blinks.
To edit numerical values, use the
Input "1.000", then press the
Press the
Functions and Operations during Measurement
key in the RUN mode to display the setting
/ key to select H.JUDGE, then press the
key to enter the editing mode, and the sub-display
/ /
key.
key to leave the setting menu.
/ keys.
193