Selecting Measured Values To Be Externally Output; Assigning Digital Output; Assigning Analog Output - Omron ZW-XC7 User Manual

5-2 Selecting Measured Values to be Externally Output

You can select the data to be output from the following routes:
• Analog output
• Digital output (EtherCAT, Ethernet)
Note
The data to be logged by the internal logging function is the data that is selected in the digital output settings.

Assigning digital output

Refer to the following chapter:
2-1 Connecting Parallel I/O in Confocal Fiber Type Displacement Sensor ZW-7000 series User's
Manual for Communication settings (Cat. No. Z363-E1).

Assigning analog output

Refer to the following chapter:
"2-1 Parallel I/O connection" described in Displacement Sensor ZW-7000 series Confocal Fiber Type
Displacement Sensor User's Manual for Communications Settings (Z363-E1-01)
ZW-7000 User's Manual

Selecting Measured Values to be Externally Output

143